FOR A LIMITED TIME... FREE SHIPPING!
NOW YOU CAN BE PART OF THE HOTTEST TREND IN AMERICA... CUSTOM-COLORED, "CONCRETE" COUNTER TOPS, WALL STONE, AND FLOOR TILE... BUT WITHOUT PAYING THE EXTREMELY HIGH RETAIL COST!
WHY PAY $8.00-$12.00+ PER SQUARE FOOT AND MORE FOR CUSTOM, HANDMADE, STONE AND TILE?
WE TEACH YOU HOW TO MAKE THIS HAND-CRAFTED STONE WITH OUR FREE INSTRUCTIONS AND MOLDS.
MAKE REAL-LOOKING STONE LIKE THAT PICTURED... FREESTANDING WALLS, PAVERS, OR STONE VENEER WITH THESE MOLDS...
WE TELL YOU HOW!
THE BEAUTIFUL FIREPLACE SHOWN IN OUR PHOTO WAS MADE BY TIM McCLELLAND, AN EBAYER JUST LIKE YOU, WITH NO PREVIOUS EXPERIENCE MAKING STONE!
HE NOT ONLY BUILT THE FIREPLACE... HE MADE THE STONE USING OUR MOLDS AND INSTRUCTIONS!!!
SAVE BIG $$$$ - MAKE THEM FOR AS LITTLE AS $0.35 A SQUARE FOOT!
We've made two pallets of our "Castle Stone" with three bags of Portland cement, (about $6.50 per bag), that equals just over 112 square feet of lightweight stone. You will get similar results with our "Olde Appalachian Fieldstone" molds.
AND YOU CAN START PRODUCING NEXT WEEK!
WHETHER YOU WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS... OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE... WE ARE THE SOURCE!
YOU ARE PURCHASING A SHEET OF TWELVE (12) DIFFERENT, "OLDE APPALACHIAN FIELDSTONE" CONCRETE MOLDS, (Totals 7 +/- Sq. Ft.).
The twelve mold sizes are as follows: 2x7, 4x7, 5x6, 5x7, 6x6, 7x9, 7x11, 7x14, 8x9, 8x10, 9x10, and 10x11. Molds were measured at their furthest points in both directions. Sizes are therefore approximate and were rounded off to the nearest full inch. The mold sheets are 28"x36" equaling about 7 sq. ft. of stone per sheet. FREE Shipping within the Continental USA.
YOU CAN MAKE CUSTOM-COLORED, HEAVY, MEDIUM, OR LIGHT-WEIGHT STONE WITH THESE. MAKE THICK STEPPING STONES, WALLS, OR THINNER STONE FOR FLOORING OR VENEER... DEPENDING ON THE THICKNESS YOU POUR THEM. THESE MOLDS ARE BETWEEN 1-1/2" TO 2-1/2" THICK.
Complete FREE instructions on how to make the stone are included!
You get twelve (12) molds that make a natural 7+/- sq. ft. pattern. Add our other OAF Sheets, (available in our Ebay Store), to get an even better "mix" of stones for larger areas.
CLICK BELOW, OR ON OUR "EBAY STORE" NAME ABOVE TO VISIT OUR STORE AND VIEW THE MANY OTHER MOLDS AVAILABLE.
CLICK HERE: http://stores.ebay.com/Olde-World-Concrete-Molds_W0QQsspagenameZl2QQtZkm
We also make many other sizes of Olde Appalachian Fieldstone molds that are approximately 1-1/2" to 2-1/2" thick, and will blend with these perfectly for walls, walks, etc... The fireplace photo in this listing includes stone made with molds from this and other OAF sets as well.
PURCHASE ALL FIVE SETS OF OLDE APPALACHIAN FIELDSTONE IN OUR STORE FOR
ONLY $379.75...
AND YOU SAVE $20.00 AND GET FREE SHIPPING!
Either order it from our Ebay Store as "Olde Appalachian Fieldstone Set of Five"... or email us if you have any questions.
These molds can be used fifty to a hundred+ times if cared for properly. They are made with .060, high-impact, virgin, polystyrene or industrial ABS plastic, for strength, durability, and flexability.
SHIPPING INFORMATION - PLEASE READ
We normally ship from our Port Charlotte, Florida shipping facility on Tuesdays and Fridays each week. Orders are shipped via either UPS or USPS. Orders are normally ready within two days of receipt of payment. The rest of the time it takes to get to you is due to the carrier. Please allow sufficient time for transit before contacting our shipping department with questions about the whereabouts of your order. Please understand that it takes over a week "in transit" for packages shipped to the western USA. Figure ten days total. Please remember that UPS and other carriers DO NOT work on weekends... and once in a great while... we don't either! :-)
COMBINING ORDERS SAVES YOU SHIPPING CHARGES
WE DO COMBINE ALL PURCHASES FROM THE SAME CUSTOMER TO SAVE THEM IN SHIPPING COSTS. DO NOT PAY FOR THE INDIVIDUAL ITEMS. ORDER THE ITEMS YOU WANT. THEN REQUEST AN INVOICE FROM US. WE WILL COMBINE THE ORDERS AND SEND YOU AN INVOICE FOR THE TOTAL, INCLUDING SHIPPING.
If you must contact our shipping department regarding a shipment that you feel may be overdue, you may email: Help@Oldeworld.com or phone 941-624-5356.
ABOUT COLORS
We provide you with instructions in the various techniques to achieve a custom colored tile or stone. But other than formulas for the basic colors in our brochure, you will have to experiment. We cannot give you the formula for a color that is "in your head". Color is somewhat "subjective". What you might refer to as a "pink" color, might be our perception of a "rose" color. Our "powder blue", might be your "light blue", etc., etc. For that reason, we can only give you some "base" color formulas. You will have to work on any changes from that formula to get exactly what you want as a finished color, as seen in your mind's eye.
HOW MUCH STONE OR TILE CAN YOU MAKE IN A DAY?
With our process, you can make one tile or stone per day, per mold. If you have a large project, you may want to consider ordering a quantity of molds based on the number of tiles or stone needed, and your work schedule. As an example... it would take you ten days to produce 100 square feet of tile, using 10 molds, 20 days using 5 molds, etc., etc.
Interested in starting your own business? Become an "Olde World Stone & Tile" Producer!
Since 1992, we've trained over 200 entrepreneurs worldwide to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!
SEE OUR OTHER EBAY LISTINGS, OR VISIT OUR NEW EBAY STORE, FOR MORE MOLD STYLES AND SIZES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.
For additional product information, tile and stone installation photos, and more... visit our extensive TheMoldStore.com and Oldeworld.com websites, or if you have questions, feel free to call us at 941-624-5356 or email: Sales@Oldeworld.com
Be sure to add us to your favorites list!
)
